What special precautions or suggestions are there for the installation and maintenance of the Mould Holder?

Installation precautions
Choose the right Mould Holder: Make sure the size of the Mould Holder matches the machine to be installed, especially pay attention to the compatibility of imperial and metric IS machines. Choose the right Mould Holder according to the weight and size of the machine to avoid overloading or unstable installation.
Check the structural stability of the installation location: Before installation, carefully check whether the structure of the installation location is stable, cracked, loose or unstable.
Use appropriate installation tools and materials: Choose appropriate installation tools and materials, such as screwdrivers, nails, bolts, etc., to ensure a secure installation. Do not use tools that are too small or inappropriate to avoid mistakes or unstable installation during installation.
Follow the installation instructions: Read and understand the installation instructions carefully and follow the steps and sequence in the instructions. If you have any questions or uncertainties, you can consult professionals for advice or seek help.
Conduct a safety check: After the installation is completed, conduct a safety check to ensure the stability and safety of the Mould Holder. The stability of the mold bracket can be tested by gently shaking or applying appropriate pressure. If there is any looseness or instability, it needs to be adjusted or fixed in time.
Maintenance Recommendations
Regular inspection: Regularly check the status of the mold bracket, including whether the screws, nails or bolts are loose, and adjust or replace them in time if necessary. Check whether the mold bracket has signs of rust, wear or other damage, and deal with any problems in time.
Keep clean: Keep the mold bracket and its surroundings clean to avoid affecting the quality and service life of the mold bracket due to a dirty working environment.
Lubrication and maintenance: If the mold bracket involves sliding or rotating parts, regular lubrication and maintenance are required to reduce wear and extend service life.
Avoid overloading: Do not overload the mold bracket to avoid deformation, damage or safety accidents.
Proper storage: When the mold bracket is not in use, it should be stored properly to avoid moisture, dampness and impact, and prevent scratches and rust on the surface of the bracket.
Following the above installation and maintenance precautions and suggestions can ensure the safe, stable and long-lasting use of the mold bracket.